View LD7246A_694561.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA S H E E T
HIGH POWER TRAVELING WAVE TUBE FOR GROUND TERMINALS
LD7246A
14 GHz, 123 W CW, CONDUCTION COOLING, MINIMUM SIZE
GENERAL DESCRIPTION
NEC LD7246A is PPM-focused traveling wave tube designed for use as final amplifier in the earth-to-satellite communications transmitter. This is capable of delivering an output power of 130 W over the range of 13.75 to 14.5 GHz. It provides a high power gain of 53 dB at 123 W output power. Furthermore, this is of rugged and reliable design offering long-life services.
FEATURES
TM Light weight, Compact and Efficient The tube has dual-depressed collectors and is designed to operate at high efficiency across wide power output range. It features state-of the art techniques to optimize size and efficiency. TM High Power Gain The power gain is typically 53 dB at 123 W level. TM Simple Cooling System The tube is conduction-cooled, so that the cooling system is greatly simplified. TM PPM Focusing The tube is PPM (Periodic Permanent Magnet) -focused, eliminating entirely focusing power supplies and interlock circuits. TM Rugged Construction The tube is designed to be rugged, therefore it is suitable for transportable systems. TM Long Life and High Stability The tube employs an advanced impregnated cathode with a low operating temperature for long life. TM Microdischarge Free The tube is carefully designed to be free from microdischarge in the electron gun for long term operation, therefore it is suitable for digital communication service.
For safe use of microwave tubes, refer to NEC document "Safety instructions to all personnel handling electron tubes" (ET0048EJVUM00)
The information in this document is subject to change without notice.
Document No. ET0205EJ1V1DS00 Date Published August 1998 M Printed in Japan
(c)
1996
LD7246A
GENERAL CHARACTERISTICS
ELECTRICAL Frequency ...................................................... 13.75 to 14.5 GHz Output Power ................................................ 123 W Heater Voltage ................................................ 4.5 V Heater Current ................................................ 1.0 A Type of Cathode ............................................. Indirectly heated, Impregnated Cathode Warm-up Time ................................. 180 s MECHANICAL Dimensions ................................................... See Outline Weight ......................................................... 1.3 kg approx. Focusing ...................................................... Periodic Permanent Magnet Mounting Position .......................................... Any Electrical Connections .................................... Flying Leads Heater, Heater-Cathode, Helix, Collector-1, Collector-2 RF Connections Input ......................................................... SMA-Female Output ...................................................... Mates with UBR-120 Flange Cooling ......................................................... Conduction
ABSOLUTE RATINGS ( Note 1, 2 and 3 )
ELECTRICAL Min. Heater Voltage ............................................. Heater Surge Current ................................. Heater Current ............................................. Heater Warm-up Time ................................. Helix Voltage ............................................. Helix Current ............................................. Collector-1 Voltage ....................................... Collector-2 Voltage ....................................... Cathode Current .......................................... RF Drive Power .......................................... Load VSWR ................................................ MECHANICAL Min. Baseplate Temperature Storage ................................................... Operation ................................................ -30 -30 +110 +110 C C Max. Unit 4.2 - - 180 6.0 - 3.1 1.5 - - - Max. 4.8 2.5 1.3 - 6.4 5.0 3.3 1.7 140 1.0 1.5 : 1 Unit V A A s kV mA kV kV mA dBm
2
LD7246A
TYPICAL OPERATION (Note 2, 3 and 5)
Unit Frequency ...................................................... Output Power ................................................ Heater Voltage (Note 4) .................................... Heater Current ................................................ Helix Voltage ................................................... Helix Current ................................................... Collector Voltage-1 .......................................... Collector Current-1 .......................................... Collector Voltage-2 .......................................... Collector Current-2 .......................................... Cathode Current ............................................. Power Gain Gain Variation Gain Slope at 6 W .............................. at 130 W ........................... at 13 W ........................... at 13 W ........................... 13.75 to 14.5 130 4.5 1 6.2 3 3.2 80 1.6 42 125 58 53 2 0.03 3.5 -32 38 GHz W V A kV mA kV mA kV mA mA dB dB dB/750 MHz dB/MHz deg./dB dBc %
AM-PM Conversion at 130 W ........................... 3rd Order Intermodulation (two equal carriers, 13 W total) ........................ Efficiency ......................................................
Note 1 : Absolute rating should not be exceeded under continuous or transient conditions. A single absolute rating may be the limitation and simultaneous operation at more than one absolute rating may not be possible. Note 2 : The tube body is at ground potential in operation. Note 3 : All voltages are referred to the cathode potential exept the heater voltage. Note 4 : The optimum operating parameters are shown on a test performance sheet for each tube. Note 5 : These characteristics and operating values may be changed as a result of additional information or product improvement. NEC should be consulted before using this information for equipment design. This data sheet should not be referred to a contractual specification.
3
LD7246A
LD7246A OUTLINE (Unit in mm)
38 9.6
38
19
14.25
14.25
Output Flange
RF Out put Mates With UBR-120 Flange
40 34
42 7
30
90
80
40
20
93
230
50 Max. 315 RF Input SMA Female
295
275
HV Lead Wires Length : 300
35
NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others.
13.21
13.21

▲Up To Search▲

Price & Availability of LD7246A

	To Download LD7246A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .